Archive for the 'children's beds' Category

September
12th 2007
Product Review: Aero Aerobed Premier Intelliwarmth

Posted under bed frames & camping beds & children's beds & guest beds & inflatable beds & mattresses & spare beds

Aero began in 1992. The method of inflating and deflating mattresses that Aero used was so new that it had only been patented shortly before the company’s inception. Designers and engineers at Aero incorporated this advanced technique and it has been a hallmark of their product line ever since. They’ve gotten so good at it, current Aero air mattresses can be filled in less than a minute and drained in 15 seconds.

The Aero Aerobed Premier Intelliwarmth is one of Aero’s flagship inflatables and sports a flat panel profile pump. Basically, the pump is in the mattress, you just plug it in. No wonder that when tested together, consumers found Aero air mattresses easier to set up than the Simmons product.

The Intelliwarmth model employs a washable mattress cover than contains what they call “heating fibers”. These fibers are controlled by a handheld remote (wired). You can adjust the temperature to offset a varied degree of chill. The remote and heating system works fine and received no complaints from consumers.

The Intelliwarmth, offered in twin, full and queen sizes, is made from 18 guage PVC. In short, it’s pretty durable, unless you stab it with a fork. However, one consumer did complain that their mattress only lasted a few days and began developing holes and seam tears, which the buyer was hopelessly unable to patch. This said, numbers show that Aero’s default rate runs at less than 5% and yes, while it possible to come across a lemon, the product line in general lives up to the Aero’s fairly strict guidelines.

If you’re concerned about all this ’strength’ making the Intelliwarmth hard as a brick, the Aerobed mattresses were preferred for comfort by a sizable number of consumers in testing lead by independent researchers.

The Intelliwarmth is a luxury mattress and with prices ranging from $200 to $300. Not in the price range of some buyers. Again there are cheaper options that will serve almost as well. If you’re in the mood for a bargain, you may want to go online. www.sparebed.com is well-liked by its customers for its ease of ordering, reasonable prices and timely shipment.

No Comments »

September
12th 2007
The Anatomy of a Mattress

Posted under camping beds & children's beds & guest beds & inflatable beds & latex mattresses & mattresses & memory foam & spare beds

Returning crusaders brought with them cushions which they threw on the floor and slept on. A novel idea in medieval Europe, but it soon caught on and Europeans absorbed enough Aramaic to put together the word we still use today – mattress.

‘Mattress’ has been in our vocabulary for almost one thousand years and the image of it is nearly universally understood, yet most consumers have no idea what goes into them. Without this knowledge of material and function, it is impossible to make an informed buying decision.

In the beginning, Europeans stuffed mattresses with natural materials such as straw and feathers. As time went by and technology changed, mattress interiors became more synthetically complex. Today, we use things such as latex, viscoelastic, or other polyurethane-type foams to compliment or replace innerspring cores.

Although water and air mattresses have evolved over time, it’s pretty well a no-brainer as to what they contain, so the following breakdown will be of a conventional mattress:

Anatomy of a mattress

Ticking – This is the layer that you actually see. Generally ticking is made from polyester or cotton-polyester and is stitched to the top padding in that familar criss-cross pattern. Ticking can vary in ’softness’. The tighter its stitching pattern, the firmer it is.

Quilt Package – This is what gives the ticking its pillowy bounce. Quilt packages are commonly made from polyurethane foam. With some mattresses, manufacturers add polyester batting. Don’t let thickness fool you, anything more than an inch could result in your quilt package developing those unsightly and uncomfortable sag points.

Padding – This separates the springs from the ticking. Consumer Reports recommends that you search out mattress padding made from latex and/or visco-elastic (known to you and me as ‘memory foam’). Latex’s pillowy firmness and ability to bounce back combined with memory foam’s ability to shape to your body helps to increase movement isolation. ‘Movement Isolation’ is a fancy phrase. Basically, the better the movement isolation of a mattress, the better chance you have of getting out of bed without waking your partner.

Coils – These give your mattress its real support. From their position beneath the padding, they determine how firm your mattress is. Manufacturers attempt to tell potential customers that their coil system is vastly superior to their competitors, but among the most popular types used, all were found capable of providing the same degree of support. The real difference between coils is their guage. The thicker the spring, the stiffer it is. This, of course, relates directly to the firmness of the mattress.

Extra Support – Some mattresses are given a little more than others. Such support might include specific areas packed with more springs, stiff foam reinforcing the edges, stiff foam laced between the coils and increased thickness of the springs.

Foundation – This keeps your mattress from rolling together like a hammock. Its sole purpose is support and therefore has no spring. Rather ironic that it is referred to as a ‘box spring’. The only real difference in foundations, is their height. Something you may want to consider, if you’re thinking of purchasing a thicker-than-standard mattress.

So now that you know what’s inside of it and underneath it, you’ll enjoy yourself more when you’re on top of it.

No Comments »

September
12th 2007
Product Review: Simmons BackCare Mattress

Posted under bedroom decor & children's beds & guest beds & mattresses & memory foam & sleep number & spare beds

Simmons Bedding Company has been manufacturing mattresses for over 125 years. Zalmon G. Simmons opened his first factory in Kenosha, Wisconsin in 1870 with a total of nine employees. In the following years the company grew well beyond it’s humble beginnings and topped $250 million dollars in net sales in the second quarter of 2007…that’s a lot of mattresses.

Somewhere in that mountain is the Simmons BackCare Mattress. Following the established trend of thicker mattresses the Simmons BackCare Mattress set comes in at height of 21″ using the low profile foundation. This means that if you buy a bed frame that’s 4″ off the floor, you have a bed that’s 25″ off the floor. Consumers going from older narrower mattresses found that it took some time to get used to this height difference.

Simmons had some difficulties with their Beautyrest line a few years ago that resulted in many of those mattresses being returned to Simmons. Apparently the mattresses were prone to forming permanent body impressions. Simmons combatted this issue by making the Beautyrest line no-flip. ‘No-flip’ of course refers to not having to flip your mattress – a task we all loathe.

Simmons BackCare Mattresses are also no-flip and have good support due to the thicker springs used. Even with the firmer support however, movement isolation has been reported as effective.

For comfort, the BackCare Mattress can be ordered with a Plushtop or Pillowtop surface. Pillowtop surfaces have had a history of packing and losing their softness. Although this problem hasn’t been reported regarding the BackCare Mattress, it may be prudent to get the Plushtop.

Consumers have found, however, that the edge support on these mattresses is less than satisfactory and could contribute to a shorter wear-life. Considering most mattress manufacturers have the same weak edge support and don’t toughen up the edges with foam until you drop a small fortune, it is a relatively small negative, but a negative none-the-less.

All-in-all, with queen sizes going for the average whopping price of $900 USD, the Simmons BackCare Mattress offers good value for your sleeping dollar if you have a lot of dollars to spend. If you are budget-minded like me, you may want to peruse some online retailers for more economical options. www.sleepingsolutions.co.uk is a reputable company in the UK that provides online service for its region and keeps the budgeted consumer in mind.

No Comments »

September
10th 2007
Thread Count – What does it mean to your linen?

Posted under allergies & bed bugs & bedroom decor & camping beds & children's beds & guest beds & linens & pillow & spare beds

We have all heard of thread count and seen those mysterious numbers labeling the linen on our store shelves, but what do those numbers mean?

Basically, thread count refers to the number of horizontal and vertical threads in one square inch of fabric. Thread counts range from 80 to 700, but most linen is sold in counts from 180 to 320. But what does this mean to you?

In many circles, higher thread counts are supposed to increase the “softness” quality of linen, but contrary to popular belief, they don’t necessarily extend the wear-life of your sheets.

Thread counts are not the be-all and end-all of the linen world however. Many industry professionals believe it is the fiber used and the final finish surface of the linen that contribute to its comfortability and wear life.

It should be noted that thread counts above 380 are a result of an industry dirty secret. Manufacturers will actually twist two threads together in a manner that doubles the thread count.

Also consider the fabric as you choose your thread count. For instance, linen (made from the flax plant), flannel (originally made from carded wool, but now made from wool and cotton, 100% cotton or wool and a synthetic fiber) and jersey (the same fabric used to make t-shirts) all have lower thread counts. If they had higher thread counts, they would lose their uniquely soft qualities.

What fabric do you pick? Well, sheet sets can be made of a long list of fibers, so I’ll list a few of the naturally occurring ones:

Silk – expensive for obvious reasons. Silk sheets require special attention, but promise a luxurious rest. That said, there are people who dislike silk because it feels like sleeping on teflon.

Cotton – expense depends on thread count and designer. 100% cotton is a popular choice as it provides comfort and durability for a reasonable price. Cotton/synthetic blends tend to breath less and, depending on the person, can result in uncomfortably clammy sleepless nights.

Hemp – moderately expensive. Hemp is a sturdy fiber and can have a cotton-like feel. Hemp’s advantages are that it is stronger than cotton and is chemical-free.

Do your research and with the help of qualified professionals, you will obtain a bedding set that is beautiful, durable and soft without sacrificing your ethics.

While online, you may want to visit www.designerlinensoutlet.com. They are one of the largest online linen suppliers in North America. But don’t let their size scare you, they have a staff ready to answer your purchase questions, a satisfaction guarantee and an easily accessible customer service department.

No Comments »

September
10th 2007
Product Review: Kyoto Quebec Guest Bed

Posted under bed frames & children's beds & guest beds & inflatable beds & latex mattresses & mattresses & spare beds

Last year I renovated and managed to create a spare bedroom. The room itself isn’t that large so I needed to find a single bed that could be turned into a double when I go from ‘guest’ to ‘guests’.

I finally bought the Kyoto Quebec Guest Bed. I was initially attracted to Kyoto Fusion Ltd, because they make hardwood bed frames from sustainable resources.

With some further investigation, I discovered that Kyoto’s hardwood bed frames were not only environmentally friendly, but they also had a great wear life.

Once I took delivery, I was impressed yet again with Kyoto’s attention to design. I’ve had guest beds in the past, but they looked cheap, didn’t last and sagged in all the wrong spots. The Quebec Guest Bed is not only beautiful, but incredibly sturdy. (as demonstrated by my two young nephews)

My bed fits neatly against the wall and with very little effort, I can slide out the ‘extra’ single, release the spring-loaded legs and have a double bed in minutes. I’ve had my guest bed for almost a year and it’s still as easy to set up as it was the first day I got it. Of course, I’m not worried too much about mechanical failure as I got a five-year warranty with the bed. (my nephews will have grown out of their destructive phase by then)

One drawback however, is expense. I had to save for months before I had the near £800 price tag on Kyoto’s Quebec Guest Bed. Admittedly, part of this cost was for a latex mattress set, but I have allergies and latex keeps me from sneezing. I still feel the dent in my pocket book, but in ten years, when my nephews are putting their kids to sleep in the bed that they themselves couldn’t break, I’ll know that my investment in my Kyoto Quebec Guest Bed was wise.

If you’re in the UK and online, you should visit www.sleepingsolutions.co.uk. I found their service to be prompt and courteous. They were especially helpful in directing me to the product that suited me best. Sleepingsolutions carry a wide variety of beds, bedding and accessories from a number of reputable manufacturers.

No Comments »

September
10th 2007
Product Review: Aero Sport® All-Terrain Bed

Posted under camping beds & children's beds & inflatable beds & mattresses & spare beds

After almost a lifetime of camping, I’ve grown to appreciate the inflatable mattress because it separates me from the rocky ground and the rainwater that inevitably finds its way into my tent. What I haven’t grown to appreciate, is the time it has taken over the years to inflate/deflate my various inflatable mattresses. Sure, I could have purchased a pump that plugs into a cigarette lighter, but my car is usually miles away from my tent.

So when it came to replacing my latest air mattress, I set about to find a product that satisfied all of my needs. I finally settled on the Aero Sport® All-Terrain Bed manufactured by Aero.

The Aero Sport® All-Terrain Bed has Aero’s unique Dual Pump that gives you the option of using in-pump rechargable battery or plugging the unit into a cigarette lighter. I don’t really need both options, but I like the fact that Aero seeks to satisfy all of the camper demographic rather than just the hard-core wilderness lovers.

I discovered that earlier products from Aero with the rechargable pump feature proved less than adequate as they were difficult to connect to the mattress and didn’t have as many charged uses as promised in the literature. Aero has worked hard and come up with solutions for both those issues in their newer rechargable pumps. Mine seems to live up to expectations and is fairly easy to connect.

My Aero Sport® All-Terrain Bed not only drastically reduces the time I spend setting up, it also requires far less space to carry than any of my other mattresses. This means I have more time to hike and I can hike further because of the reduced payload requirements.

My brother is proof that the Aero Sport® All-Terrain Bed is good for first time campers. He was able to set up the bed without incident. I wish I could say the same thing about the tent. Anyway, he is going to get a queen-sized All-Terrain so he can use it for camping and also for a spare guest bed. It must be comfortable!

The Aero Sport® All-Terrain Bed is rugged and durable, and Aero stands behind it with a one-year limited warranty. It also comes in twin size and queen size, which means you need a large enough tent for it, but believe me, it’s worth it.

If you’re looking for an online distributor, Sparebed.com carries a wide selection of Aero products, not to mention a plethora of other air mattress brands. I found the folks at Sparebed.com to be quite helpful in helping me select the mattress that was right for me.

No Comments »

September
8th 2007
Product Review: Silentnight Latex Comfort Mattress

Posted under bed bugs & children's beds & mattresses & pest control & safety

Having a quality mattress isn’t just a luxury. Considering that over your lifetime you might spend the equivalent of almost forty years in bed, possessing a quality mattress is a necessity . Good mattresses do not come cheap however and if you’re like me, purchasing a new mattress is an infrequent event. If you have a good mattress and take care of it, it can last as long as a decade. In that time, however, even a good mattress can become harmful to you.

When you crawl under the covers every night, you’re getting into bed with approximately two million nasty little spider-like creatures called dust mites. These mites aren’t the only things defiling your mattress. You leave behind dead skin and perspiration every morning. This combined with the mites and a decade of use could result in allergies and hypersensitivity related diseases.

So what are you going to do, if you’re unable to replace your mattress every two years? Latex.

Latex is inherently anti-microbial and mite resistant. The Silentnight Latex Comfort Mattress has a layer of natural latex over its ultra-supportive microcoil spring system. What does all of this mean?

Well, now you have a mattress that could last for ten years and not endanger your health. Besides this, there are other advantages to Silentnight’s Latex Comfort Mattress.

As mentioned before, the microcoil system provides more support than other conventional mattresses, because the springs run from the head to the foot of the mattress. This prevents "roll off" and "roll together", a good thing if you don’t want to end up on the floor or sandwiched against your sleeping partner. This system also isolates movement, so you can get out of bed without waking your partner.

The research team at Silentnight are also very aware your Posture Zone (the area in which you sleep) and have added extra springs where necessary in the Latex Comfort Mattress to provide greater more effective support.

Latex provides the ultimate comfort over the microcoil system’s unfailing support. It moulds around your contours, allowing your body to relax into a naturally restful posture and comfortably holds you in that position.

There is a price to pay for all this comfort and it’s a bit of an investment, but if you amortise the cost over a decade of sleeping bliss, I’m sure you will feel that you’ve spent your money well.

In the UK, we recommend you get your Latex Comfort Mattress from Sleeping Solutions, the online presence of the renowned Sussex Beds chain. They stock quality products and have a reputation for looking after customers.

No Comments »

September
6th 2007
Product Review: PoshTots childrens products

Posted under children's beds & linens & mattresses


About the company: Your child’s room is the place where they will grow and learn, so why shouldn’t they get the very best? At PoshTots.com, you can find all of the things you will need to create a space for your child to call their own. From cribs to bunk beds, diaper bags to playhouses, Posh Tots is a one-stop resource for parents who want to provide all the essentials—and more—to their growing and ever-changing children to ensure a world that will inspire and enrich.

The big pitch: Your Children Deserve the Very Best. PoshTots provides parents with items for their children, including furniture, bedding, home décor items, diaper bags, gifts, toys, lighting, rugs, playhouses, apparel and strollers. On their easy-to-use website, you can search through these categories to find the perfect items for any child’s room. You won’t find discount items here, but you’re paying for luxury and that’s what you get.

For the busy yet loving parents, PoshTots not only provides everything you need for your child’s room, but also provides a database of ready-made rooms. PoshTots designs match together the exact things you need to create beautiful rooms. With one click of the mouse, you can order every item you see in the room to easily produce the same room in your own home. Alternatively, you can pick and choose the items you want from a specific design.

Have some time on your hands? PoshTots also organizes their inventory by theme. If you want to get creative with your child’s décor, you can choose a theme from the 30+ ideas provided and then choose among the beds, dressers, lamps, etc that could fit that theme. Home décor has never been so easy and never looked so good!

And PoshTots isn’t just home décor. We know that your child’s playtime is important to foster learning and creativity. That’s why PoshTots provides a large section devoted to fun—our playhouses. PoshTot playhouses aren’t your ordinary playhouses; each one is a miniature world for your child. Furnishings are also available for the playhouses, as well as a variety of toys to make the houses into home.

You can give your child a comfortable room at a low cost by shopping at almost any child’s company or department store, but PoshTots is the only place where you can find everything you need to give your child the exact room to complement their own tastes and personality. PoshTots will help you give your child the room of their dreams.

The Product Trends rating: PoshTots is a friendly company with an website you can navigate effortlessly and a catalogue of all the items you can ever need to furnish your child’s life. The company provides luxury for children’s rooms and gives parents a place to shop for the very best, whether they have a lot of time or not. Attracting everyone from celebrities to parents on a budget, PoshTots has something to meet the needs of anyone who visits their website.

Five stars. –Reviewed by Allison Boyer

To try PoshTots for yourself, click the image below:
PoshTots

No Comments »